Irrigation Products

Approx. Rs 250 / PieceGet Latest Price

• Aluminium construction
• Suitable for irrigation, domestic water lines
• Multiple models available
• Available sizes: 1/2" to 4"
• Dual function: air release and vacuum relief
• Durable, weather-resistant and non-corrosive
• Made of polypropylene
• Maximum working pressure: 100 psi

Approx. Rs 3,300 / NumberGet Latest Price

TECHNICAL INFORMATION
• 30% fiberglass
• Single-piece diaphragm for reliable leak-free valve closing
• Self cleaning stainless-steel metering pin
• Stainless-steel diaphragm differential spring for smooth closing
• PN12 tested piece by piece at 14 bar
• Bleed handle for manual opening with internal bleed
• Standard solenoid: 24 VAC
• Flow Control

OPERATING CONDITIONS
• Pressure: min 1.0 bar - max 12.0 bar
• Temperature: +4° C/70° C  
• Flow rate: from 20 l/min to 50 l/min 

Approx. Rs 1,400 / NumberGet Latest Price

Sizes: 1", 1 1/2" & 2"
Reliability

• Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
• Robust construction and electrical design for quiet performance you can count on.
• Rugged PVC and glass-filled nylon construction for reliable operation.
• Normally closed, forward flow design.
• Filtered pilot flow to resist debris and clogging.
• Slow closing to prevent water hammer and subsequent system damage.

Ease of Use

• Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance.
• Globe and angle configuration for flexibility in design and installation.
• One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
• Non-rising flow control handle adjusts water flow as needed.

• Pressure: 15 to 150 psi (1.04 to 10.4 bar)
• Water temperature: Up to 110°F (43°C)
• Ambient temperature: Up to 125°F (52°C)

• 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
• Inrush current: 0.41A (9.9VA) at 60Hz
• Holding current: 0.14A (3.43VA) at 60Hz
• Solenoid coil resistance: 30-39 Ohms, nominal

Approx. Rs 6,600 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,000 / PieceGet Latest Price

Thread Connections

1.               Inlet Thread: 1" BSP Male Thread.

2.               Outlet Thread: 1� BSP Male Thread.

Features

·        Superb Hydraulic performance with High Kv Factor.

·        Low Pressure Loss.

·        Low power consumption.

·        Normaly closed type.

Applications

1.               It is widely used in automatic irrigation sprinkler systems using controller.

2.               Used in drip irrigation system.

3.               Can be used in downstreem pipeline & distribution lines.

4.               Wide range of industrial applications.

5.               Can be used for simple on/off functioning of valve.

Materials Used

·        Body, Cover: 30% Glass Filled Nylon.

·        Diaphragm: NR with Nylon Fabric Reinforced.

·        Seal: Natural Rubber.

·        Spring: Stainless Steel.

·        Cover Bolts: Stainless Steel.

·        Tubing & Fitting: Plastic.

·        Solenoid Pilot Unit: Special Pilot

·        Weather Resistant, Encapsulated Design.

Additional Information:

Approx. Rs 1,400 / PieceGet Latest Price

Thread Connections

1.               Inlet Thread: 1" to 2.5" BSP Male Thread.

2.     Outlet Thread: 1" to 2.5” BSP Male Thread.

Specifications

·        Designed Pressure: Upto 10 Kg/Sq.cm.

·        Operting Pressure Range: 0.7 to 10Kg/sq.cm.

·        Minimum Sealing Pressure: 0.7 Kg/Sq.cm.

·        Supply Voltage: - 2o-28 V AC, 50/60 Hz.

·        Temperature Range: Water upto 60° C.

Features

1.               Superb Hydraulic performance with High Kv Factor.

2.     Low Pressure Loss.

3.     Low power consumption.

4.     Normaly closed type.

Applications

·        It is widely used in automatic irrigation sprinkler systems using controller.

·        Used in drip irrigation system.

·        Can be used in downstreem pipeline & distribution lines.

·        Wide range of industrial applications.

·        Can be used for simple on/off functioning of valve.

Materials Used

1.               Body,Cover: 30% Glass Filled Nylon.

2.     Diaphragm: NR with Nylon Fabric Reinforced.

3.     Seal: Natural Rubber.

4.     Spring: Stainless Steel.

5.     Cover Bolts: Stainless Steel.

6.     Tubing & Fitting: Plastic.

7.     Solenoid Pilot Unit: Special Pilot.

8.      Weather Resistant, Encapsulated Design.

Approx. Rs 150 / PieceGet Latest Price

Compact and reliable sprinklers for any application. Adjustable from 0° to 360° full-circle operation, saving hours of installation time, effort, and money.

• Small exposed cover makes the unit virtually invisible for more attractive landscapes
• Constructed of durable materials including corrosion resistant stainless steel, assuring long product life even in high pressure or surge conditions
• Pressure-activated wiper seal prevents excessive flow-by and water waste and keeps debris from entering upon retraction
• Two-piece ratchet mechanism allows easy nozzle pattern alignment and provides added durability

Flow-by: 0 at 10 psi (0.75 bar) or greater;

Dimensions: 1/2" female threaded inlet

Body Height: 14.9 cm

Exposed Surface Diameter: 3.2 cm