Industrial Valves

Approx. Rs 4,000 / PieceGet Latest Price

Product Details:

Knife Edge Gate Valves are designed for Isolation, On-Off and Throttling services in Paper and Pulp Industries, Power Plants, Steel Plants, Cement Plants, Sugar Industries, Chemical and Textile Processing Industries, Mining, Food Beverages, Bulk Handling and Water Sewage Plants to handle Slurries, Slag, Pulp and Fibrous Materials, Fly Ash, Powders and Clean or Corrosive gases.

Knife Edge Gate Valves can be operated by Hand wheel (rising non-rising stem), Lever, Electric or Pneumatic Actuator and Chain Wheels. When needed, Lock-Out Devices can be provided to prevent accidental opening or closing of the valve.

All automated valves can be also provided accessories like Mechanical Stop Switches, Proximity Switches, Manual Override, Positioners, Extended Stem and Solenoid Valves.

Approx. Rs 750 / PieceGet Latest Price

Product Details:

Ball Type Check Valves is a non return valve with a very simple and robust design. The heart of the valve is rubber coated ball. The hinge-pin-disc mechanism used in conventional check valves, which is the cause of most operation and maintenance issues such as pressure drop, imperfect sealing, leakage, clogging, etc., is eliminated.

As the pump starts, the ball moves out totally from the flow path, giving a full bore with maximum flow discharge and minimum head losses. As the pump stops, the ball rolls back and seats perfectly on the rounded valves seat ensuring totally leak proof sealing.

Salient Features:

1. Lowest possible pressure drop across all types of check valves.
2. 100% leak proof sealing years over years.
3. Non-clogging and self cleaning as ball rotates during operation.
4. Virtually no wear and tear, no maintenance and longer service life.
5. Higher solid handling capacity due to full bore and straight internal path.
6. Lower head loss-high discharge, reduced pumping time - All leading to Energy Savings.

Applications:

Clean water, Raw water, Sewage, Slurry, Waste Water, Viscous liquids etc.

Used in industries like:

The typical applications are domestic pumping and irrigation systems.

Approx. Rs 7,000 / PieceGet Latest Price

Product Details:

The function of these air valve is to vent air from water pipelines. Our high performance air valves feature a single chamber, double orifice and triple function design. Primarily, the large venting orifice allows large volumes of air to be released on pump start up. The second function is to allow air to enter into the pipelines for the purpose of vaccum breaking on pump shut down. Thirdly, the small venting orifice allows air to be released during pump operation and under fluid pressure.
The construction of the valve body is heavy duty ductile iron with fusion bonded epoxy powder coating on the inside as well as the outside. and the float is made from stainless steel.

Advantages:

1. Reliable Design
2. Compact Dimensions
3. Higher capacity than standard air valves

 

Approx. Rs 200 / PieceGet Latest Price

Product Details:

Quarter-Turn Ball Valves are widely used in Process Industries. These Valves are basically Soft Seated, giving 100% Leak Proof tight shut off at temperature ranging from - 20°C to 200°C. The Valves are provided with Self Lubricated Replaceable PTFE Moulded Seat Mirror finished polished Stainless Steel Ball, which reduces friction and gives very smooth operation.

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

Ball Type Check Valves is a non return valve with a very simple and robust design. The heart of the valve is rubber coated ball. The hinge-pin-disc mechanism used in conventional check valves, which is the cause of most operation and maintenance issues such as pressure drop, imperfect sealing, leakage, clogging, etc., is eliminated.

As the pump starts, the ball moves out totally from the flow path, giving a full bore with maximum flow discharge and minimum head losses. As the pump stops, the ball rolls back and seats perfectly on the rounded valves seat ensuring totally leak proof sealing.

Salient Features:

1. Lowest possible pressure drop across all types of check valves.
2. 100% leak proof sealing years over years.
3. Non-clogging and self cleaning as ball rotates during operation.
4. Virtually no wear and tear, no maintenance and longer service life.
5. Higher solid handling capacity due to full bore and straight internal path.
6. Lower head loss-high discharge, reduced pumping time - All leading to Energy Savings.

Applications:

Clean water, Raw water, Sewage, Slurry, Waste Water, Viscous liquids etc.

Used in industries like:

Fire fighting, Plumbing, Water distribution, Water/Sewage treatment, Irrigation/agriculture, Sewage plants, Steel mills, Power stations, Chemical/process industries, HVAC, Sugar/food industry, Breweries, Mining and many more.

This valve is also available with optional rubber lining.

Approx. Rs 600 / PieceGet Latest Price

Product Details:

We are the No.1 source for butterfly valves in Coimbatore. We have a large variety of butterfly valves in sizes from 1" (25 mm) up to 16" (400 mm). Most of these sizes are available ready stock. Our butterfly valves are durable, reliable, quality tested and inexpensive.

Approx. Rs 800 / PieceGet Latest Price

Product Details:

Approx. Rs 800 / PieceGet Latest Price

Product Details:

Approx. Rs 975 / PieceGet Latest Price

Product Details:

Same pattern as 'Kitz' Butterfly Valves.

Features:

Powder coated smooth-finish exterior

Lightweight aluminium die-cast body is also ideal for PVC/ PPR/ HDPE pipelines

Streamlined rust-proof SS304 / SS316 disc eliminates friction and prevents pressure drop

EPDM seat to handle different kinds of line fluids

Long neck blocks transfer of heat/cold to valve operating lever/ actuator

Low torque operation results in easy handling

Low cost, low maintenance, long service life

ISO 5211 mounting flange easy on-the-spot actuator assembly for automation

Bi-directional & zero leakage, 100% tight shut off

Replaceable EPDM seat

Available in 1.5” to 8” Sizes

Specifications:
PartsMaterialBodyAluminium Die-cast/Equivalent ASTM B85-84-383.0
NeckAluminium Die-cast/Equivalent ASTM B85-84-383.0StemEquivalent ASTM A276 Type 410DiscA351 Gr. CF8/ CF8M (Optional)O-ringEPDMRubber SeatEPDMBottom StemEquivalent ASTM A276 Type 410BearingMetal Backed PTFE
Manufacturing standard As per IS : 13095 "ISI" marked and Certified

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

Normex Ball Foot Valves are regarded as the only reliable, 100% leakproof foot valves. These valves are the solution to priming problems.

In the application where foot valve is involved, the main concern of the user is draining of water by the foot valve. This calls for the ‘priming’ of the the pump which is time consuming tedious job. If the “on-off frequency” is more, the trouble rises multifolds. A heavily leaking footvalve can also give rise to start up trouble to pump as suction line is empty. A leaking footvalve can cause not only time wastage but also delay in process industry where water is required at particular instant.

In typical case of Fire Fighting application, if the foot valve leaks, the pump is not started can cause damage to property as well as life. Even in application in irrigation / agriculture sector, where electricity is available for limited time, intermittent priming of the pump every time, day and night, is not possible.

With Ball Foot Valve (Threaded or Flanged) installed, priming is totally avoided. Normex Ball Foot Valves are recommended by many Plumbing, Fire, HVAC & Irrigation contractors and consultants for their life-long reliability.

Approx. Rs 1,200 / PieceGet Latest Price

Product Details:

Approx. Rs 870 / PieceGet Latest Price

Product Details:

Body made of high quality uPVC for strength and chemical resistance. Disc made of stainless steel (SS304/316) for higher pressure rating.
Features:

1. Light Weight and easy to install
2. Single Piece Body made of UPVC
3. Special disc designed to ensure low torque and low pressure loss.
4. Suitable for piping in a limited space.
5. Rust Prevention: Main parts such as Disc, shaft and small parts such as bolts & washers are made of high graded stainless steel (SSS304/316) for rust prevention.
6. Lock Plate provided with throttling notches every 15° 

Approx. Rs 3,000 / PieceGet Latest Price

Product Details:

Flush Bottom Tank Valves, widely used for discharging materials from processing tanks, are designed so as to completely seal off the outlet nozzle at the inner vessel wall. This prevents solids from accumulating and solidifying in the outlet nozzle neck and stopping discharge of the vessel contents. It also prevents the collection of un-reacted material in the nozzle. Flush Bottom Tank Valves have a modified 'Y' type body and Angle type design - with the stem being located in the vertical branch of the valve. Seat and disc design is similar to that of a globe valve with metal to metal seating. The disc can lift up from the seat and open into the vessel, or the disc can pull down from the seat and open into the valve.

Features:

• Unique design of our flush bottom valves assure zero 'hold-up' in the bottom pad of the tank and facilitate the free flow and quick discharge of the liquid or slurry through the valves. 
• Conical Metal to Metal disc seating/ PTFE seating with option of Fixed or Renewable seat. Further metal seating can be hardened for applications where distortion of seat by aggressive liquid or slurry is common. 
• Available with Pneumatic or Electrical Actuator assembly.
• Teflon Lined models for sanitary aseptic applications in food and pharma industries. 

Approx. Rs 160 / PieceGet Latest Price

Product Details:

High quality Cold and Hot Water Tank Liquid Level Metal Float Valve Body Stainless Steel Stem float valve for water tank. Using High-Quality spool, Uniform Wall Thickness, High Temperature Resistance, Corrosion Resistance, Wear Resistance Shiny Miror Electroplated Polished Smooth Surface, Combination of High Quality Elements thus Acid- Resistance, Alkali Resistance, Anti-Aging, Do not Release Harmful Substances, Long Service Life, Light Weight, Available in 1/2" to 2" Size

Approx. Rs 5,000 / PieceGet Latest Price

Product Details:

Features:

• Powder coated smooth-finish exterior
• Lightweight aluminium die-cast body is also ideal for PVC/ PPR/ HDPE pipelines
• Streamlined rust-proof SS304 / SS316 disc eliminates friction and prevents pressure drop
• EPDM seat to handle different kinds of line fluids
• Long neck blocks transfer of heat/cold to valve operating lever/ actuator
• Low torque operation results in easy handling
• Low cost, low maintenance, long service life
• ISO 5211 mounting flange easy on-the-spot actuator assembly for automation
• Bi-directional & zero leakage, 100% tight shut off
• Replaceable EPDM seat
• Available in 2” to 8” Sizes

Specifications:

Approx. Rs 1,350 / PieceGet Latest Price

Product Details:

Pressure reducer for water. To reduce and stabilize the pressure in a water system. The Pressure Reducing Valve with adjustable outlet pressure is designed to protect appliances against excessive supply pressures. By installing a pressure reducing valve, water consumption can be drastically reduced; water flow noise and over-pressurisation damage is avoided.

Pressure reducing valves are suitable for domestic water services, heating and air-conditioning plants, compressed air systems. They can be used with water, compressed air and non-aggressive fluids.

Specifications:

• Sizes: 1/2" to 2"
• Compensated piston operation;
• Female/female threads;
• Body in nickel-plated brass;
• Temperature range: 0°C - 80°C;
• Maximum inlet pressure: 25bar;
• Outlet pressure can be adjusted between 1 and 6 bar;
• Outlet pressure gauge connection 1/4” on both sides;

Approx. Rs 1,350 / PieceGet Latest Price

Product Details:

Knife Edge Gate Valves are designed for Isolation, On-Off and Throttling services in Paper and Pulp Industries, Power Plants, Steel Plants, Cement Plants, Sugar Industries, Chemical and Textile Processing Industries, Mining, Food Beverages, Bulk Handling and Water Sewage Plants to handle Slurries, Slag, Pulp and Fibrous Materials, Fly Ash, Powders and Clean or Corrosive gases.

Knife Edge Gate Valves can be operated by Hand wheel (rising non-rising stem), Lever, Electric or Pneumatic Actuator and Chain Wheels. When needed, Lock-Out Devices can be provided to prevent accidental opening or closing of the valve. 

All automated valves can be also provided accessories like Mechanical Stop Switches, Proximity Switches, Manual Override, Positioners, Extended Stem and Solenoid Valves.