Ram Nagar, Coimbatore, Tamil Nadu
GST No. 33AIJPS2761D1ZC
Approx. Rs 750 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 1 Piece |
Media | Water |
Usage/Application | Water |
Valve Size | 15mm |
Material | Brass/Bronze |
Pressure | 10 Bar |
Actuation Type | Electrical |
Series | Compact |
Structure | Casted |
Type Of Coil Protection | IP 54 |
High performance brass body solenoid valves are available up to sizes 2" with a 2-way, internally piloted normally closed body. Electrical connection is a NEMA4 rating. BUNA sealing allows this solenoid valve to be ideal for air, gas, water and oil industries. Viton seats are available by request.
2-WAY BRASS BODY SOLENOID VALVEAdditional Information:
Approx. Rs 500 / PieceGet Latest Price
Product Details:Media | Water |
Brand | All Brands |
Valve Size | 1/4" |
Material | Stainless Steel |
Pressure | Up to 20 Bar |
Actuation Type | Electrical |
Series | Normally Closed& Open |
Approx. Rs 10,000 / PieceGet Latest Price
Product Details:Power | Hydraulic |
Size | 2 to 6 Inch |
Control Type | Lever |
Material | Mild Steel |
Phase | Single Phase |
Pressure | 16 Bar |
Electrical Actuator Details | ||
Characteristic | : | On – Off Type / With Position Control |
Travel | : | 90 Degree |
Indicator | : | Continuous Position Indicator |
Phase | : | Single Phase |
Power Supply | : | 230V AC / 24V DC / 12V DC, 50 Hz |
Body Material | : | Aluminum Alloy |
Ambient Temperature | : | 20°C ~ 80°C |
Motor Insulation | : | Class F |
Protection Class | : | IP – 67 Weather Proof |
Manual Adjustment | : | Wrench Setting |
Limit Switch | : | 1NO + 1NC output of 220V AC |
Position Power Failure | : | Stay Put |
Manual Override | : | Provided |
|
|
|
Accessories | ||
Modulating Controller | : | 4 ~ 20 mA (Available on request) |
Potentiometer Feedback | : | Available on request |
Integral Starter unit | : | Available on request |
Control Panel | : | Available on request |
Approx. Rs 4,500 / PieceGet Latest Price
Product Details:Material | Stainless Steel, Aluminium |
Media | Air, Water, Gas, Fuel, Powder/Solids |
Pressure | PN 10, PN16, PN 20 |
Butterfly Valve - Technical Specifications | |
Body | Cast Iron / Cast Steel / Aluminium Diecast / SS304 (CF8) / SS316 (CF8M) |
Disc | Cast Steel / Ductile Iron / SS304 (CF8) / SS316 (CF8M) |
Seat | Nitrile / EPDM / Neoprene / PTFE |
Seat Leakage | Tight Shut Off |
Temperature | -20°C to 200°C |
Pressure Rating | PN 10 / PN 16 ( PN 20 ON REQUEST) |
End Connection | Wafer Type Suitable to 150#, Table 'D' & 'E' Flanges |
Pneumatic Actuator - Technical Specifications | |
Type | Rack & Pinion |
Body | Single Piece Extruded Aluminium |
End Caps | Aluminium Die Cast |
Shaft (Pinion) | EN8/AISI SS304 |
Pistons (Racks) | Aluminium Die Cast |
Rack Bushing | Composite Material |
Piston Guide Rings | Composite Material |
O-Rings | NBR |
Fasteners | Stainless Steel |
Travel | 0° - 90° |
Action | Double Acting / Single Acting (Spring Return) |
Position Indicator | Multifunctional Mechanical Position Indicator with Mounting Slot as per VDI/VDE3845 and NAMUR |
Mounting Base | As per ISO5211 and DIN3337 |
Ambient Temperature | -20°C ~ +70°C |
Air Supply | Filtered, Dry or Lubricated |
Lubrication | EP type grease |
Ambient Humidity | Max 90% RH |
Additional Information:
Approx. Rs 7,500 / PieceGet Latest Price
Product Details:Size | 1/2" to 8" |
End Connection | Threaded, Flanged, Socket Welded, TC Ends |
Additional Information:
Approx. Rs 8,200 / PieceGet Latest Price
Product Details:Size | 1/2" to 8" |
Pressure Range | 10 Bar to 70 Bar |
Temperature Range | -30 C up to 200 C |
Additional Information:
Approx. Rs 1,200 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Brand | Jekon |
Usage/Application | Industrial |
Body Style | Y Type |
Connection Type | Threaded,Flanged,Welded,TC |
Material | SS304/SS316 |
Pressure | Up to PN1.6 |
Diameter | 1/2" to 6" |
Actuator Type | Pneumatic Single Acting |
Temperature | Up to 180 C |
Media | Steam |
Actuator | ||
Body | SS 304 Pressed | |
Cover Flange | ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast | |
Spring | Spring Steel (IS 4454 Gr. III) | |
Port Connection | 1/4″ BSP (NPT on request) | |
Operating Pressure | 3.5 to 7 Bar | |
Position Indicator | Nylon | |
Operating Cycles | 350 to 650 Cycles / Hr. | |
Media | Dry Lubricated Air / Inert Gases Moisture Separators are advised to be used in line | |
Valve | ||
Size | 1/2″ to 4″ Screwed / Flanged | |
Body | ASTM A351 Gr. CF8 / CF8M / CF3M | |
Steam Packing | PTFE upto 180°C, Self-compensating (Spring Loaded) | |
Trim / Spindle | Stainless Steel 304/316/316L | |
Seat | Soft Seat (PTFE) | |
Gland Packing | Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating) | |
Body Test Pressure | 24 Bar Maximum | |
End Connections | Female Screwed to BSP or NPT / Flanged / Triclover | |
Working Fluid Press | Refer to table | |
Leakage | Drop Tight / Bubble Tight, Class IV ANSI B 16, 104, 1976 | |
Operating Temp. | On steam – Continuous 155°C, Intermittent 180°C Maximum (High Temp. above 180°C – On Request) | |
Media | Air, Water, Oil, Gas, Steam & Chemical |
Approx. Rs 1,200 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Material | Mild Steel |
Brand | Jekon |
Usage/Application | Water |
Pressure | Low Pressure |
Finished Type | Polished |
Power | Manual |
Operator | Lever |
APPLICATIONS:
Hygienic Powder & Fluids/ Chemicals and Dyeing Fluids in Textile Processing/ Brine Water/ Oil/ Steam/ Air/ Gas
Actuator | ||
Type | Rack and Pinion Type | |
Actuation | Double Acting / Single Acting (Spring Return) | |
Mounting Std. | ISO 5211 (International Standard) | |
Pneumatic Connections | NAMUR Standard | |
Valve | ||
Size Range | 11/2″ TO 8″ (14″ TO 20″ ON REQUEST) | |
Body | WCB/CF8/CF8M/Cast Iron | |
Disc | WCB/CF8/CF8M/Cast Iron | |
Seat | PTFE Replaceable (available EPDM / Viton / Metal to Metal) | |
Pressure Range | 12 kg/cm2 22 kg/cm2 | |
Temperature Range | 200°C to 550° C | |
Plate Mounting | Namur Standard | |
Operation | Hand Lever / Worm Gear Box / Pneumatic Actuated / Electrical Actuated |
Approx. Rs 10,000 / PieceGet Latest Price
Product Details:Minimum Order Quantity | 1 Piece |
Actuator Type | Electric Actuator |
Brand | FLOMAX |
Structure | Control |
Voltage | 230 V AC |
Stroke Length | Rotary motion type |
Model Name/Number | Electrcal Actuator |
Pressure | Medium Pressure |
Valve Motion | Rotary Motion Valve |
Electric actuators appear in a number of industries. Typically, they’re used in industrial applications associated with manufacturing valves, pumps, and motors. They most commonly automate industrial valves, and many types of technical process plants use them, including:
· Upstream, midstream, and downstream oil and gas plants
· Wastewater treatment plants
· Power plants
· Food and beverage plants
· Farming and agricultural plants
· Pulp and paper plants
Additional Information:
Approx. Rs 1,200 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Connection Type | Thread |
Material | SS |
Pressure | 16 Bar |
Power | Hydraulic |
2/2 WAY PNEUMATICS CYLINDER OPERATED ANGLE SEAT VALVES | |
SIZE | 1/2″ TO 4″ (15MM TO 100MM) |
BODY | CF8/CF8M |
MOC | S.S.304/S.S.316/ S.S.316L/WCB |
SEAT | PTFE |
TYPE | NORMALLY CLOSE |
PRESSURE | UP TO 16BAR |
TEMPERATURE | 250 C MAX |
AIR PRESSURE | 2 TO 7 BAR |
ENDS | SCREWED/FLANGED |
MEDIA | AIR, WATER, OIL, GAS, STEAM, CHEMICAL, ETC. |
Approx. Rs 1,200 / NumberGet Latest Price
Product Details:Minimum Order Quantity | 1 Number |
Media | Air |
Material | Stainless Steel |
Usage/Application | Water |
Pressure | Low Pressure |
Valve Size | 1/2 Inch |
Actuator | ||
Body | SS 304 Pressed | |
Cover Flange | ASTM A351 Gr. Cf8 (SS 304) Investment Die-Cast | |
Spring | Spring Steel (IS 4454 Gr. III) | |
Port Connection | 1/4″ BSP (NPT on request) | |
Operating Pressure | 3.5 to 7 Bar | |
Position Indicator | Nylon | |
Operating Cycles | 350 to 650 Cycles / Hr. | |
Media | Dry Lubricated Air / Innert Gasses Asten Moisture Separators are advised to use in line | |
Valve | ||
Size | 1/2″ to 3″ Screwed / Flanged | |
Body | ASTM A351 Gr. CF8 / CF8M / CF3M | |
Steam Packing | PTFE upto 180°C, Self-compensating (Spring Loaded) | |
Trim / Spindle | Stainless Steel 304/316/316L | |
Seat | Soft Seat (PTFE) | |
Gland Packing | Teflon ‘V’ seals, backed by graphite wiper seal (Self Compensating) | |
Body Test Pressure | 42 Bar Maximum | |
End Connections | Female Screwed to BSP or NPT / Flange / Triclover | |
Working Fluid Press | Drop tight / bubble tight, class IV ANSI B 16, 104, 1976 | |
Leakage | On steam – Continues 155°C, Intermittent 180°C Maximum | |
Operating Temp. | (High Temp. above 180°C – On Request) | |
Media | Air, Water, Oil, Gas, Steam & Chemical |
Explore More Products
© Flow-Tech Enterprise. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited